 |
 |
|
|
| |
|
|
|
| |
|
|
|
|
| |
 |
| NovoCoat Protective Coating products are high-performance, 100% solids, liquid protective coatings, user-safe and environmentally friendly. All formulations leverage the intrinsic properties of the highest-quality ingredients to deliver maximum performance for the needs of the water, wastewater, marine, oil, gas, chemical processing, power generation, pulp & paper, semiconductor, electronics, food & beverage, mines, metal processing and transportation industries.The coating products have been specifically engineered by on-staff chemists with more than 30 years experience to deliver consistent performance in harsh environments and demanding applications. The range of formulations includes: 100% solids novolac and ceramic epoxies; single component water-based coatings, and polyurethanes. |
|
|
| |
|
| A 100% solids, low viscosity primer designed for sealing concrete. Its slow cure rate makes it ideal for warm weather applications. |
| Low viscosity hybrid novolac epoxy primer designed for deep penetration and sealing of concrete surfaces. |
| Helps eliminate outgassing and bubbles. |
| Can be applied to green concrete as young as seven days. |
|
|
|
| |
SC Series Application Guide, SC-1100 Data Sheet |
|
| |
|
| A ceramic tough novolac epoxy coating designed for use as a high performance top coat in floor applications. |
| Perfect for any shop, garage, semiconductor, or warehouse floors. |
| Excellent wear resistance. |
| Not recommended for severe chemical service, however it is an excellent choice for a slurry tank lining. |
|
|
|
| |
SC-2100 Data Sheet |
|
| |
|
| 100% solids, sprayable, industrial maintenance coating for metal and concrete substrates. |
| A high cross-link density, ceramic-filled novolac coating that is designed to provide superior, long-term chemical resistance and good immersion service. |
| The solids content and morphology make SC-3000M an excellent tank liner. |
|
|
|
| |
SC-3000M Data Sheet |
|
| |
|
| The high ceramic solids content of SC-3000Y makes it suitable for applications such as slurry tanks, floors and FGD scrubbers. |
| 100% solids, sprayable, industrial maintenance coating for metal and concrete substrates.SC-3000Y is a high cross-link density; ceramic-filled novolac coating that is designed to provide superior, long-term chemical resistance and good immersion service. |
| Excellent long term corrosion resistance, great immersion service. |
|
|
|
| |
SC-3000Y Data Sheet |
|
| |
|
| a 100% solids novolac coating designed for high wear, in addition to strong acids and chemicals. |
| durable and ceramic tough; ideal for floor use where chemical resistance is necessary. |
| Ideal choice for aircraft hanger floors, storage rooms, warehouses, clean rooms, secondary containment, tank linings, pipe coating and many other uses. |
| SC-3100 provides protection against 70% sulfuric acid, 50% caustic, oils, fuels, salts, 15% chromic acid, 85% phosphoric acid and more. |
| Available in a flame retardant version. |
|
|
|
| |
SC-3100, SC-3100FR Data Sheets |
|
| |
|
| 100% solids, sprayable, industrial maintenance coating for metal and concrete substrates. |
| A high cross-link density; ceramic-filled novolac coating that is designed to provide superior, long-term chemical resistance and good immersion service. |
| The solids content and morphology make SC-3300 an excellent tank liner. |
|
|
|
| |
SC-3300 Data Sheet |
|
| |
|
| 100% solids, specialized novolac coating designed to withstand multiple, rapid temperature variations. |
| Provides excellent chemical and heat resistance; Will withstand temperatures in excess of 400°F. |
| Outstanding for pipe wraps, leaks, scrubbers, crackers, stacks, primary and secondary containment, valves, fittings, fans blowers, compressors, ducts, chemical line, brine/slurry tanks and more. |
|
|
|
| |
SC-3406 Data Sheet |
|
| |
|
| 100% solids novolac coating designed for maximum heat and chemical resistance. |
| Excellent coating for floors, secondary containment, ducts, piping, vessels, and storage tanks. |
| Withstands up to 98% sulfuric acid, 100% phosphoric acid, 35% nitric acid, 100% hydrofluoric acid, MEK, mineral acids, bleach, chlorides, potassium and sodium. |
| A true high performance coating. |
|
|
|
| |
SC-5400 Data Sheet |
|
| |
|
| An economically priced, safe, and high performance alternative to conventional coal tar epoxies. |
| Comprised of 100% solids and contains no VOC’s. |
| Excellent adhesion properties allow SP-2000R to bond on steel, concrete and iron even when coating conditions are less than ideal. |
| Typical applications include watewater (tanks, lift stations, wet wells, and manholes), cooling towers, and can also be used as an interior or exterior pipe lining or coating. |
|
|
|
| |
SP Series Application Guide, SP-2000R Data Sheet |
|
| |
|
| NSF/ANSI 61 certified for drinking water. |
| 100% solids, contains no volatile organic compounds or solvents and may be safely applied in confined areas with good ventilation. |
| since 1990 is a standard for lining ductile pipe used in sewage gathering systems. |
|
|
|
| |
SP-2000W Data Sheet |
|
| |
|
| Engineered for areas where severe abrasion resistance with less than 24 mg loss on ASTM-D-4060 test. |
| Provides outstanding long term wear characteristics. |
| 100% Solids, No VOC’s. |
|
|
|
| |
SP-2000M Data Sheet |
|
| |
|
| 100% Solids, Epoxy Novolac, no VOC or Isocyantes. |
| The ultimate coating for repairs and rehabilitation for pipelines operating at maximum temperatures up to 200°C (392°F). |
| Two-part, solvent free epoxy can easily achieve a dry film thickness of up to 40 mils with one pass. |
| Rehabilitation and repair of pipelines, new pipelines, or any other metal substrate needing corrosion protection |
|
|
|
| |
R-200 Application Guide, Data Sheet |
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
Back to Top
|
|
| |
|
|
|
