| |
|
|
|
| |
 |
Automax Supernova series Rack and Pinion actuators are designed for butterfly, plug, or ball valves, and offer one compact design for double acting and spring return. Precision die-cast pistons with large cylinder bearings increases efficiency and cycle life. The actuators incorporate a precision-extruded hard anodized aluminum body and a one piece nitride coated or nickel-plated pinion gear, factory lubricated for a long trouble-free life.
|
|
| |
 |
| Pneumatic Rack and Pinion Actuator |
| One design for double acting and spring return. |
| Corrosion resistant hard anodized aluminum body with stainless steel fasteners. |
| Torques outputs from 36 to 58,232 inch-pounds. |
| Dual ISO mounting pad. |
| Numar accessory mounting. |
| Integral travel stops in both directions. |
|
|
|
| |
Pneumatic Actuator Catalog, SuperNova IOM Instructions |
|
| |
 |
| Electric Quarterturn Actuator |
| Available in NEMA 4, 4x, 7 and 9 designs. |
| Housings of aluminum with electro-static polyester powder coating and Reinforced Zytel. |
| Torque outputs from 100 to 3,500 inch-pounds. |
| Permanently lubricated, heat treated alloy steel gear train. |
| Available voltages: 24, 120, 240 VAC and 12, 24 VDC. |
| On/Off and Modulating service. |
|
|
|
| |
Electric Actuator Catalog, CE Series IOM Instructions, CPL Series IOM Instructions |
|
| |
 |
| Pneumatic Heavy Duty Scotch Yoke Actuator |
| Pneumatic, gas and hydraulic models. |
| Double Acting and Spring return. |
| Pressure ranges from 40 to 2,500 psi. |
| Torque outputs from 1,000 to 170,000 inch-pounds. |
| Precision machined scotch yoke with induction hardened, chrome plated pin. |
| Precision drawn cup needle bearing at the torque shaft journals. |
| Pneumatic actuators utilize a quad seal piston seal. |
|
|
|
| |
Pneumatic Actuator Catalog, R Series IOM Instructions |
|
| |
 |
| NEMA 4, 4x, 7 and 9 ratings. |
| Housings available in die cast aluminum and zytel plastic. |
| UL and C-UL ratings. |
| High contrast, wide angle position indicators. |
| Spring loaded cams for tool free switch adjustment. |
| Switches available in a wide range of options. |
| Dual conduit connections. |
|
|
|
| |
GL, PL and XL Series Product Specs, UltraSwitch IOM Instructions |
|
| |
 |
| Integrated Valve Controller |
| NEMA 4, 4x, 7 and 9 ratings. |
| Internal pilot solenoid coil contained within controller housing. |
| Spring loaded cams for tool free switch adjustment. |
| 3 standard ½” conduit entries. |
Available with fieldbus technology:
- Foundation Fieldbus
- Profibus DP
- AS-i
- DeviceNet
|
| High contrast, wide angle position indicators. |
|
|
|
| |
Aviator Product Specs, Aviator IOM Instructions, Fieldbus Protocol IOM. Profibus Protocol IOM |
|
| |
 |
| Pneumatic and Electro-pneumatic models. |
| Die cast aluminum with electrostatic powder coat and non-metallic Noryl housing options. |
| Digital models. |
| Modular design. |
| Low, high and maximum flow spool valve versions to match load requirements. |
| Non-interactive span adjustment. |
| Adjustable gain allows sensitivity adjustment without removing or replacing components. |
| Various feedback options. |
| Optional high contrast, wide angle position indicators. |
|
|
|
| |
Apex 4000, 4100, 4200 Product Specs, Apex IOM |
|
| |
 |
Industry standard HART protocol. |
Piezo technology combined with inner-loop feedback for precise control. |
21 point custom characterization allows the valve to be in virtually any position the operator desires for a given signal. |
Local status LEDs provide instant information relating to internal diagnostic codes. |
NUMAR and NDI/VDE interfaces provide direct mounting to various rotary and linear actuators. |
|
|
|
| |
Logix 500 and 1000 Product Specs |
|
| |
|
|
| |
